Advanced User Information
Setting, Changing, and Restoring Print Server Settings
68
61207L-002 B HC100 User Guide 11/15/10
DEFAULT NET Restore Print Server Default Values
Restores the wired and wireless network settings back to factory defaults.
Corresponding ZPL Command: ^JUN
Corresponding SGD Command: none
Located on Web Page: View and Modify Printer Settings (Restore Default
Network Configuration button)
To restore printer default values through the control panel, complete
these steps:
1. Press and hold PAUSE/FEED to place the printer in user configuration mode.
The printer status indicator blinks orange. Depending on when you release
PAUSE/FEED, different actions take place.
2. Release PAUSE/FEED after the orange light blinks three times.
The printer resets all print server parameters back to defaults.
Table 10 • Print Server Parameters (Continued)
Parameter Details
To Next Page
Loading...
