Zebra KR203 - Page 33

27
Connections
Connecting the Printer to the Host
10/26/2010 KR203 Hardware Integrator Guide P1028247-001 Rev. B
To minimize electrical noise pickup in the cable:
• Keep data cables as short as possible (6 foot [1.83 m] recommended).
• Do not tightly bundle the data cables with power cords.
• Do not tie the data cables to power wire conduits.
• Avoid fluorescent lighting and power supply components.
Communicating with the Printer
The only way to begin using your complete kiosk printing solution is to utilize the Windows
Driver. With the driver loaded, you can test the kiosk printing system, configure your
printer, and view printer error codes. Refer to the Software Integrator Guide (P1028248)
for installation instructions.
The latest driver can be found at www.zebra.com
.