Need help?Do you have a question about the Zebra KR403 and is the answer not in the manual?
General| Print Method | Direct thermal |
|---|---|
| Resolution | 203 dpi |
| Print Width | 4.09 inches |
| Max Print Length | 39 inches |
| Memory | 16 MB SDRAM, 8 MB Flash |
| Connectivity | USB, RS-232 Serial |
| Media Sensors | Reflective, transmissive |
| Media Handling | tear-off |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
Overview of the KR403 model, its features, and capabilities.
Support contact information for technical assistance, repair, and training.
Explains formatting, symbols, and text conventions used in the guide.
Key factors for integrating the printer into a kiosk environment.
Physical dimensions and mounting hole locations of the KR403 printer.
Details key components like printhead, cutter, presenter, and sensors.
Covers print method, resolution, speed, and supported media widths.
Instructions for securely mounting the printer using its base plate.
Explains Kiosk, Rewind, and Cutter modes for different applications.
Describes the printer's operational controls, indicators, and sensors.
How the printer monitors, reports status, and handles errors.
Various methods and software for configuring the printer.
Guidelines for safely routing cables to avoid interference and damage.
Details on connecting the required power supply for printer operation.
Explains how to connect via USB, Serial, or Ethernet interfaces.
Specifies shielded cables needed for reliable communication.
Details on RS232 serial connection setup and parameters.
Details on connecting the printer via its Ethernet port.
Tips for creating custom systems for smooth and reliable media flow.
Essential factors for proper media feeding and print quality.
How printer angle affects operation based on environment and media.
Details on the essential media guides for correct paper width sensing.
How to identify direct thermal vs. thermal transfer media.
Instructions for correctly orienting and preparing a new media roll.
The process for automatically loading media into the printer.
Procedure for safely removing jammed paper from the printer.
Introduces various optional accessories for enhancing printer functionality.
A versatile holder supporting multiple roll positions and sizes.
Official 70W power supply unit tested for the KR403 printer.
Adapter to prevent motor strain with large media rolls.
Guidance for managing cables when the large media roll adapter is installed.
Explains the meaning of different status light patterns.
Diagnoses and resolves issues related to print appearance and clarity.
Addresses issues where the printer fails to detect or handle media correctly.
Troubleshooting steps for when media fails to feed into the printer.
Covers miscellaneous troubleshooting topics like cutting issues and lack of lights.
Information on how to obtain assistance from Zebra support.
To Next Page
