RS5100 Quick Start Guide
7
Mounting the RS5100
1. Slide the RS5100 onto the index finger with the Scan Trigger next to the thumb.
2. To tighten the Finger Strap on the Single Trigger, pull the end of the strap through the Strap Buckle. To loosen
the Finger Strap, lift the Strap Buckle away from the Finger Strap while pulling the strap through the Strap
Buckle. Release the Strap Buckle to hold the Finger Strap in place.
Scan Trigger
Single Trigger
Double Trigger
Scan Trigger
Finger Strap
Strap Buckle
MN-003559-02EN_rs5100-qsg-en.fm Page 7
To Next Page
Loading...