Only use CR1632 batteries within the lower jaw sensor.
Seite 19/69
Page 19/47JMA-Optic
3.5.3. Changing the battery
To replace the battery of the lower jaw sensor, proceed as follows:
Required Materials:Screw driver
■
Type TX 06
■
Coin Cell Type CR1632
Open the cover of the battery with a screwdriver TX06.
Remove the used battery.
Insert the new battery (type CR1632) into the
battery holder and screw the cover back on.
Disposal of the used battery Refer to chapter:
7.5. Disposal, p. 34
3.5.4. Type plate UK-Sensor OJM-UK1
To Next Page
Loading...
