Need help?Do you have a question about the Zeck Audio FMS and is the answer not in the manual?
Explains the basic structure of a mixer, input/output, pre-amplification, master signal, and monitor signal.
Clarifies the handling of mono and stereo signals across various mixer paths.
Discusses the impact of high-quality components and construction on mixer performance and longevity.
Outlines the necessary equipment and features for an effective mixing console.
Covers ease of maintenance and the product's warranty provisions.
Introduces the FMS and PMS series, explaining model numbering conventions.
Details the modular construction and available desk or flight case configurations.
Describes the XLR microphone and mono jack line inputs, including their specifications.
Explains controls like In/Out, -20 dB Pad, Mic/Line selector, Gain, and associated LEDs.
Details the 5-band EQ and the function of Aux 1, Aux 2, and Aux 3 sends.
Covers monitor outputs, subgroup/master panning, PFL, Solo, and channel on/off switches.
Explains the PFL/Clip, Range, and On LEDs, along with the channel fader operation.
Outlines subgroup uses in live mixing, outputs, and tape return inputs.
Details insert jacks, tape return sockets, and the subgroup level LED.
Explains Aux sends, tape return volume, master routing, and pan controls for subgroups.
Covers PFL monitoring, Solo function for subgroups, and the subgroup fader.
Describes balanced monitor/master outputs and insert jack functionality.
Details return sockets for effects and Aux send outputs.
Explains master controls for Aux sends and creating monitor effects mixes.
Covers effects volume, range LED, PFL, and Solo functions for effects.
Details the effects route on/off switch and the monitor fader.
Explains PFL monitoring and Solo function for monitor signals.
Describes balanced master outputs and insert jack functionality.
Details return sockets for effects and Aux send outputs.
Explains master level, ready/standby, and PFL/Solo indicator LEDs.
Covers controls for mixing effects into monitors and controlling effects volume.
Explains monitoring effects returns and using PFL for precise signal setting.
Details the effects route on/off switch and the master fader for output control.
Covers PFL/Solo functions and record/play outputs for tape decks.
Details EQ and volume controls for the tape input signal.
Explains talkback mic input, headphone output behavior, and the standby function.
Provides guidance on connecting input and master modules, including MIC, Line, and DI box usage.
Advises on correct phantom power usage to prevent operational issues.
Lists common problems and solutions for input and subgroup modules.
Addresses common issues related to master module aux sends, returns, and output noise.
General| Aux Sends | 2 |
|---|---|
| EQ | 3-band |
| Effects | Built-in digital effects |
| USB Interface | Yes |
| Phantom Power | Yes |
To Next Page
