Zeiss Gom T-SCAN hawk User Manual

Info
During calibration, make sure no other single point markers aect the pro‐
cedure.
Only use the calibration object. Make sure there are no other highly reflec‐
tive objects near the calibration objects.
When not calibrating, keep the calibration object in the protective sleeve.
After calibration, close the dialog. You can now begin taking measure‐
ments.
Calibrate the Sensor
0000001879_002_EN_30-09-2020 Page 17 (19)

Zeiss Gom T-SCAN hawk Specifications

General

Brand	Zeiss
Model	Gom T-SCAN hawk
Category	Measuring Instruments
Language	English