EasyManuals Logo

Zeiss LSM 700 Specifications

Zeiss LSM 700
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Specifications LSM 700
Microscopes
Stands
Upright: Axio Imager.Z1m, M1m and Axio Scope mot for LSM
Inverted: Axio Observer.Z1m SP (side port)
Z drive
Axio Imager: Step motor, smallest increment 10 or 25 nm
Axio Observer: DC motor with opto-electronic coding, smallest increment 10 nm
XY stage (option)
Motorized XY scanning stage with Mark & Find (XYZ) and Tile Scan (Mosaic Scan) functions
Objectives
More than 40 reected-light objectives: EC Epiplans, EC Epiplan-Neouars, EC Epiplan-Neouars,
EC Epiplan-Apochromats, LD Epiplans, LD EC Epiplan-Neouars
Accessories
High-resolution AxioCam microscope camera
Scanning module
Scanner
Two independent galvanometric scanning mirrors with ultra-short line and frame yback
Scanning resolution
4 x 1 to 2048 x 2048 pixels, continuously adjustable
Scanning speed
13 x 2 speed stages, Up to 5 frames/s with 512 x 512 pixels (max. 154 frames/s with 512 x 16 pixels)
Scanning zoom
0.5 x to 40 x, variable in increments of 0.1
Scanning rotation
Freely rotatable around 360°, variable in increments of 0.1°
Scanning eld
Field diagonal of 18 mm (max.) in the intermediate image plane, homogeneous illumination
of image eld
Pinhole
Motorized master pinhole, diameter continuously adjustable
Detection
One or two confocal channels (reection/uorescence), one optional external transmitted-light
channel with DIC capability, each with high-sensitivity PMT detector, spectral increment 1 nm
Data depth
Selectable between 8 bit, 12 bit or 16 bit
Laser inserts
Laser inserts (VIS, V)
Pigtail-coupled solid-state laser with polarization-preserving single-mode ber; up to 4 V/VIS
laser directly connectable to the scanning module; laser lines 405 nm 5 mW or 445 nm 5 mW;
488 nm 10 mW; 555 nm 10 mW; 639 nm 5 mW (at ber end)
Fast (pixel-exact) customized and variable intensity adjustment of all laser lines (direct modulation)
Automatic shutdown of laser when not in use
Electronics module
Control computer
Real-time electronics integrated in PC; communication with user PC via PCI express; Control of
microscope, lasers, scanning module and additional accessories, data acquisition and synchronization;
Over sampling acquisition for best sensitivity and doubled SNR; possibility of online data-analysis
during acquisition
User PC
High-end PC with ample RAM and hard disk storage capacity; ergonomic high-resolution
16:10 LCD-TFT at-panel display, Windows VISTA operating system with multi-user capability
Ethernet connection to local network
26

Other manuals for Zeiss LSM 700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zeiss LSM 700 and is the answer not in the manual?

Zeiss LSM 700 Specifications

General IconGeneral
Microscope TypeConfocal Laser Scanning Microscope
Laser Wavelengths405 nm, 488 nm, 555 nm, 639 nm
Scan SpeedUp to 8 frames per second at 512 x 512 pixels
Objective Magnification5x to 100x
SoftwareZEN
Scanning MethodGalvanometric
Z-StackingYes
DimensionsVaries depending on configuration
WeightVaries depending on configuration
Objective LensesVarious objectives available (air, water, oil immersion)

Related product manuals