Need help?Do you have a question about the Zeiss TIRF 3 and is the answer not in the manual?
General| Brand | Zeiss |
|---|---|
| Model | TIRF 3 |
| Category | Laboratory Equipment |
| Language | English |
Provides general safety information and standards compliance for the imaging system.
Details crucial instructions for safe operation and handling of the laser system.
Guidance on proper installation procedures and safety requirements.
Information on computer and software safety requirements for system operation.
Details on connection points for service and customer interaction.
Illustrates and explains warning and information labels on the equipment.
Outlines the manufacturer's warranty terms and conditions.
Defines the purpose and application of the Laser TIRF imaging system.
Explains the scientific principles and working mechanism of TIRF microscopy.
Details the components and key features of the Laser TIRF imaging system.
Details the Laser Bench Tower and Laser Bench Rack components.
Information on the signal distribution box and its function.
Describes the TIRF controller used for system operation.
Ensures laser safety within the sample compartment.
Details the basic laser safety kit and its components.
Explains the remote switch for controlling laser operation modes.
Outlines the overall laser safety concept and interlock system.
Provides an overview of system configuration options and choices.
Presents a visual overview of the Laser TIRF imaging system components.
Details compatibility between stages and laser safety devices.
Lists compatibility of XLmulti incubators with accessories.
Summarizes stage versions compatible with Axio Observer TIRF.
Recommends suitable objectives for optimal TIRF performance.
Lists suitable fluorescence filter sets for TIRF microscopy.
Details combinations with the Colibri.2 illumination system.
Specifies optical fibers suitable for the TIRF imaging system.
Provides technical specifications for system components.
Covers requirements for installing the Laser TIRF imaging system.
Details the physical space and layout needed for system installation.
Specifies the electrical power needs and connections for the system.
Defines the environmental conditions required for system operation.
Specifies requirements for the compatible microscope stand.
Guides on essential basic microscope settings for operation.
Instructions for mounting the laser safety cover for specific stages.
Step-by-step guide for mounting the S TIRF S1/DARK S1 incubator.
Details on the XLmulti S1 incubators and their usage.
Explains laser safety through reed contact positions within the incubator.
Provides instructions for mounting the XLmulti S1 incubators.
Details the PM S1 LS incubator and its heating inserts.
Instructions for mounting the PM S1 LS incubator.
Guide for assembling the magnet screw for laser safety.
Information on S TIRF S1 and S TIRF DARK S1 incubators.
Procedure for inserting the Slider Laser TIRF into the microscope.
Overview of the control and functional elements of the system.
Details the control elements of the manual and motorized Slider Laser TIRF.
Explains the control and functional elements of the Laser Bench Tower.
Explains the control and functional elements of the Laser Bench Rack.
Step-by-step guide for powering on the entire system.
Procedure for safely powering off the system and its components.
Guide to controlling the system via ZEN 2012 software.
Guides on adjusting laser beam divergence and TIRF angle.
Lists components included in the TIRF adjustment tool kit.
Detailed steps for adjusting laser beam divergence using the tool.
Procedure for adjusting and checking the TIRF angle with the tool.
Instructions for adjusting the TIRF effect on the manual slider.
Guide to controlling the system via ZEN 2012 software.
Procedure for calibrating the angle on the motorized slider.
Explains how to measure the penetration depth of the evanescent field.
Details Snell's Law as applied to TIRF microscopy.
Describes the relationship between angle and voltage for the slider.
Method for determining the critical angle for TIRF.
Procedure for determining the refractive index of the specimen.
Guidelines for basic user care and cleaning of the instrument.
References for detailed instrument maintenance procedures.
Provides solutions for common problems encountered during operation.
Instructions for replacing fuses in various system components.
Procedure for changing the halogen lamp.
Information on retrofitting laser units by authorized personnel.
Steps for connecting and mounting the camera to the microscope.
Guide for connecting the HXP 120 illumination unit.
Information on how to request service and support.
Laser safety concept for using external laser modules.
Details the safety kit for integrating customer-provided laser modules.
Explains the remote switch for controlling laser mode with external lasers.
Guide for connecting the remote switch for laser mode.
Information on the basic laser safety kit for external lasers.
Steps for connecting the motorized Slider Laser TIRF.
Procedure for coupling an external laser to the system.
Checklist for ensuring safety before initial system startup.
Details power requirements for systems with customer lasers.
Provides a list of abbreviations used in the manual.
To Next Page
