Zeliox ECO - Page 34

Type
Times
of ALM
light
flashes
Name
Processing suggestions
Fault
protection
13
Low
temperature
protection
for BMS
circuits
 Please check that the ambient
temperature at the location where the
ECO is to be installed is below -40°C. If
so, the ECO is not suitable for operation
at such a low ambient temperature and
the best ambient temperature for the ECO
installation is above -20°C.
 If the above is normal, please contact
your dealer.
14
External
input
overvoltage
protection
 Please contact your dealer after switching
off the charger.
15
BMS internal
faults
 Please contact your dealer.
Table 7-1 FAQ
34