ZENAIR CH2000 SERVICE MANUAL
________________________________________________________________________
ENGINE MAINTENANCE PROCEDURES:
See Lycoming Manual. In particular:
- LUBRICATION:
See Lycoming Manual pages 4.3, 4.4 and 5.8
- MAGNETO TIMING:
If timing is required: see Lycoming Manual pages 4.4 and 5.1.
- IDLE SPEED and MIXTURE ADJUSTMENT:
If idle RPM needs adjustment: see Lycoming Manual page 5.7 for the
procedure and Fig. 13 in the present Manual for the location of the
adjusting screws.
ENGINE TROUBLE SHOOTING
See Lycoming Manual, Section 6.
NOTE: The magneto wiring is shown in the Lycoming Manual on Fig. 5.1.
Feb-00 6.5
To Next Page
Loading...
