26
DVD Operation
Playing a DVD
Playback Setup
• Turn on the TV and select the video input source con-
nected to the unit.
• Audio system: Turn on the audio system and select
the input source connected to the unit.
11
Press OPEN/CLOSE (
ZZ
) to open the disc tray.
22
Load your chosen disc in the tray, with the
playback side facing down.
33
Press OPEN/CLOSE (
ZZ
) to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD which offers a menu.
Use the
11 223344
buttons to select the title/chapter you
want to view, then press MEMORY/ENTER to start
playback.
Press TITLE or DISC MENU to return to the menu
screen.
otes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 21).
– DVDs may have a regional code.
Your receiver will not play discs that have a regional
code different from your receiver. The regional code
for this receiver is 1 (one).
General Features
ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
Moving to another TITLE
When a disc has more than one title, you can move to
another title as follows:
• Press DISPLAY, then press the appropriate number
button (0-9) to select a title number.
Moving to another CHAPTER/TRACK
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
•
Press . or > briefly during playback to select the
next chapter/track or to return to the beginning of the cur-
rent chapter/track.
•
Press . twice briefly to step back to the previous
chapter/track.
•
To go directly to any chapter during DVD playback, press
DISPLAY. Then, press
33
/
44
to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
ote
For two-digit numbers, press the numbered buttons
(0-9)in rapid succession.
Search
1 Press and hold . or > for about two seconds
during playback.
The receiver will now go into SEARCH mode.
2 Press and hold . or > repeatedly to select the
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100 (for-
ward).
3 To return to normal play, press PLAY.
Pause
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY.
DVD
DVD
To Next Page
Loading...
