Zephyr AK6500 series User Manual

iNSTALLATiON
MOUNTINGTHE RANGEHOOD
ELECTRICAL
All Electricalwork must by performedby qualifiedelectricianor personwith similartechnical
knowhow andbackground.
Forpersonalsafety,removehousefuseor opencircuitbreakerbeforebeginninginstallation.
Donotuseextensioncordor adapterplugwiththisappliance.
FollowNationalelectricalcodesor prevailinglocalcodesandordinances.
Electrical Supply:
This appliance requires a 120V 60Hzelectrical supply., and connected to an individual, properly
grounded branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse.Wiring
must be 2 wire w/ground. Pleasealso refer Electrical Diagram labeled on product.
Cable Lock:
A cable locking connector (not supplied) might also be required by local codes. Checkwith local
requirementsand codes, purchaseand install appropriate connector if necessary.
]
CableLock
Models:AK6500,AK6536,AK6542,AK2500,AK2536 Page4

Zephyr AK6500 series Specifications

General

Brand	Zephyr
Model	AK6500 series
Category	Ventilation Hood
Language	English