Tip - to update a cue within a chase, or a cue that has an auto-cue after it, press and hold Shift, and tap your
playback's go button, to go into the cue you wish to update. The following cue will then not automatically play,
allowing you to update the cue you need.
Update Options
After tapping Update, the update options window will open on the
external monitor, to allow you to choose what gets added, or removed,
from the cue you are updating. To open the Update Options on the
internal touchscreen, press and hold Update.
Zero 88 - ZerOS - Page 114 of 233 Printed: 23/11/2020 12:50:03 JH