The Macro Settings allows you to use the Playback Mode drop down
to toggle between Fast or Slow. Fast is the default, and will be suitable
for almost all macros. Some macros that take you in and out of Setup
for example, may require to be played back at a slower rate.
Copying Macros
Macros can be copied, useful if you wish to rearrange your macro tiles in the macros window. This can be done using
the following syntax:
Macro 2 0 Copy 3 0 Enter
Macro 20 Copy To 30
Deleting Macros
To delete any macro, press Delete followed by touching the relevant macro tile on the touchscreen. Macros can
also be deleted using syntax by typing one of the following commands:
Macro 4 2 Delete
This deletes macro 42.
Delete Macro 7 Enter
Delete Macro 7
This deletes macro 7.
Delete Macro tap the macro you wish to delete.
You do not need to press the “Macro” button if the macro window is already displayed.
After choosing a macro to delete, the console will ask you to confirm
this action before the command is executed. Once deleted, a macro
cannot be recovered but can be recreated manually if required.
Triggering Macros
Zero 88 - ZerOS - Page 155 of 233 Printed: 23/11/2020 12:50:03 JH
To Next Page
Loading...
Need help?
General
