General Maintenance
6.31
Low Power B+ Fuse (ZF7.2)
To acces s the fuse :
1. Remove bolt (A) securing the fuse cover.
2. Remove cover (B) to gain access to the fuse.
3. Unscrew the fuse cap (C) and withdraw the fuse from the
battery.
4. Pull fuse from fuse cap and replace fuse with one of
equivalent rating (SPT3.15A).
5. Install fuse and cap.
6. Install cover (B) and secure with bolt (A). Torque - 1 lb·ft
(1.3 Nm).
Zero Owner's Manual (S and DS).book Page 31 Monday, September 21, 2020 11:43 AM
To Next Page
Loading...
