Controls and Components
3.9
A. Adjust Button (ADJ)
See “Dash Settings”, on page 3.13.
B. Select Button (SEL)
See “Dash Settings”, on page 3.13.
C. Charge Indicator
This indicator and readout displays the amount of energy
remaining in the power pack, similar to the fuel gauge on a
gasoline powered vehicle.
D. Remaining Charge Time Indicator
This area displays the amount of time left for the power
pack to reach full charge.
E. Clock
The clock displays time in standard (AM/PM) or 24 hour
mode. See “Setting the Clock”, on page 3.14.
F. Speedometer
The speedometer is a digital display in either kilometers per
hour (km/h) or miles per hour (mph). See “Unit Display -
Speed”, on page 3.15.
G. Odometer
The odometer displays the total distance the motorcycle has
been ridden in kilometers or miles.
H. Performance Modes
This area displays which performance riding mode (ECO,
SPORT, and CUSTOM) has been selected by the rider
using the performance level mode button located on the
right handlebar control assembly. See “Performance Level
Mode Button”, on page 3.20.
I. Output Meter
The OUTPUT meter indicates the amount of TORQUE
applied to the rear wheel and the POWER (energy) being
used while riding.
J. Regen Meter
The regenerative energy (REGEN) meter indicates the
amount of TORQUE on the rear wheel and the POWER
(energy) feeding back into the battery of the motorcycle
during the regenerative braking process.
K. Displays A&B
Displays A&B can be customized to display functions which
include Trip odometers, Range, Errors, RPM, Trip Average,
Lifetime Average, and Temperature. All are accessible by
using the ADJ and SEL buttons. See “Dash Settings”, on
page 3.13.
L. Bluetooth® Indicator
This indicator displays when an active Bluetooth® equipped
smartphone is paired with the motorcycle. For Pairing
instructions, see “Bluetooth® Pairing”, on page 3.16.
Zero Owner's Manual (S and DS).book Page 9 Monday, September 21, 2020 11:43 AM
To Next Page
Loading...
