General Maintenance
6.22
Headlight Bulb Replacement
WARNING! Halogen bulbs contain gas under pressure. Handling
a bulb improperly could cause it to shatter into flying glass
fragments, which could result in serious injury. To help avoid
injury:
• Turn the key switch OFF and allow the bulb to cool before
changing the bulb.
• Leave the key switch OFF until the bulb change is complete.
• Always wear eye protection when changing a halogen bulb.
• Avoid touching the glass.
CAUTION: Using higher wattage bulbs that specified can/will
cause the headlight lens to melt.
To replace the bulb:
1. Working from behind the headlight, disconnect the headlight
bulb connector (A) and rubber cover (B).
Zero Owner's Manual (S and DS).book Page 22 Monday, September 21, 2020 11:43 AM
To Next Page
Loading...
