General Maintenance
6.23
2. Remove the headlight bulb retainer (A) by turning it
counter-clockwise.
3. Remove the headlight bulb by pulling it straight out.
CAUTION: Do not touch the glass portion of the headlight bulb.
Keep the headlight bulb free of contaminants. Oil from your
fingers or contaminants will shorten the life of the bulb.
Thoroughly clean any fingerprints or contaminants from the bulb
using a clean cloth moistened with alcohol.
4. Install the headlight bulb into the lens.
5. Install the headlight bulb retainer and turn it clockwise until it
locks into position.
6. Install the headlight bulb rubber cover.
7. Connect the headlight bulb connector.
Zero Owner's Manual (S and DS).book Page 23 Monday, September 21, 2020 11:43 AM
To Next Page
Loading...
