ZERO-X stratus+ User Manual

27
14.0 BEGINNER MODE
1. Max flight altitude - The default factory setting is OFF, therefore the Drone
can reach a maximum altitude of 120 metres. To increase the maximum
Drone altitude, activate the setting to ON, and move the setting slider in
order to set the desired altitude. (between 15m-120m).
2. Max flight distance - The default factory setting is OFF, and the Drone
can reach a maximum flight distance of 1000 metres. If you want to
change the maximum flight distance the Drone can reach, switch
the setting to ON and move the slider to set the desired distance
(between 15m-200m).
3. Orbit radius - The default factory setting is 5 metres. If you want to change
the orbit radius move the slider to set the desired radius (between 5m -
50m).
4. Return to Home (RTH) - The default factory setting is 15 metres. To
change this, move the slider to set the new RTH altitude
(between 15m - 50m).
5. Geomagnetism calibration - If you press this icon
you can replace one of the compass calibration
processes, which involves using the remote control.
Alternatively, if you would like to continue using
the remote control method, push both control
sticks to the bottom right corner (5pm direction),
see the image to the right.
6. Gyro calibration - If you press this icon you can
replace one of the gyro calibration processes which
involves using the remote control. Alternatively,
if you would like to continue using the remote
control method, push both the control sticks to the
bottom left corner, as per image on the right.
1
2
3
4
5
6

ZERO-X stratus+ Specifications

General

Brand	ZERO-X
Model	stratus+
Category	Drones
Language	English