Zero Zone RVCC30 - Page 18

LINEUP ASSEMBLY
Figure 13: Joining Insulated Dividers with Nut Inserts
.125
4.250
5.500
2-1/2" Insulated Divider Joining Kit
Insulated
divider
(factory
attached)
Caulk case joints per I&O manual.
For attaching
frames
Case to be joined
not shown
3
1
3
2
4
NOTES:
PAPER TO BE 20 POUND, COLOR BLUE. 1.
A .PDF COPY OF THIS LABEL IS AVAILABLE. 2.
LABEL IS DRAWN ACTUAL SIZE. 3.
DWG NO. SP-0397 REV.H
.125
4.250
5.500
JOINING HARDWARE
TOLERANCES:
(PER SP-0457)
STANDARD
RELEASED
PART WEIGHT:
(IN LBS)
CAD DRAWING
NO MANUAL REVISIONS
COPYRIGHT INFORMATION
THIS DRAWING AND THE INFORMATION CONTAINED WITHIN, IS
THE SOLE PROPERTY OF ZERO ZONE, INC. ANY USE OF THIS
DOCUMENT OR DISCLOSURE OF ITS CONTENTS; BY
REPRODUCTION OR OTHER MEANS, WITHOUT THE WRITTEN
CONSENT OF ZERO ZONE, INC. IS STRICTLY PROHIBITED.
SEE NOTE
SEE NOTE
FINISH:
(PER SP-0154)
MATERIAL:
(PER SP-0404)
(UNLESS OTHERWISE SPECIFIED)
A
SHEET
SIZE
NOT TO SCALE
Joe Zyduck
SCALE:
MODELED BY:
DRAWN BY:
UNLESS OTHERWISE
SPECIFIED, ALL DIMENSIONS
ARE IN DECIMAL INCH
10/17/2012
H
1 OF 1
SP-0397
LABEL INSULATED DIVIDER
SHEET: DATE:
REVISION
ZERO ZONE, INC.
110 NORTH OAKRIDGE DRIVE
NORTH PRAIRIE, WISCONSIN
USA 53153
DRAWING No:
DESCRIPTION:
BY
DATE
ECN No.
REVISION DESCRIPTION No.
JZ 10/17/2012
9712
REDRAWN; SHIM DESC. 2" X 6" WAS 2" X 5"
H
REVISION INFORMATION
ADD SHIM P/N 41-0166
14 • Lineup Assembly