Controls and Components
3.11
A Left Turn Signal Indicator Flashes green when a left turn is selected by the turn signal
switch. This arrow remains flashing until the turn signal
request has been canceled.
B System Warning Indicator Indicates a system fault has been detected.
See
“System Warning Indicator”, on page 7.2 for more information.
C Temperature Warning Indicator A flashing light indicates that one or more of the
powertrain components are approaching their
temperature limit. Performance will not be affected.
If the light illuminates continuously, it indicates that one or
more of the powertrain components have exceeded their
temperature limit. Performance will be reduced until the
component(s) have cooled sufficiently.
See “Temperature Indicator”, on page 4.5
.
D Check Engine Light Indicates the motorcycle has detected an error, causing it to
enter into a state of permanent torque reduction. This light
will be accompanied by a dash error code.
See
“Dash Error Codes”, on page 7.5 for more information.
Contact your dealer and arrange to have the motorcycle
serviced.
E Armed/Live Indicator Indicates the motorcycle is live or ready to move if the throttle
is actuated.
Zero Owner's Manual (FX and FXS).book Page 11 Tuesday, October 23, 2018 1:54 PM
To Next Page
Loading...
