Zero FXS 2019

Power Pack and Charging
5.7
change the amount of time that the motorcycle takes to
charge.
Note: AVOID connecting the Zero charger and another
device to a single 120 V AC 15A/20A circuit, as it may
become overloaded. Zero chargers draw as much as
14 amps from the 120 V AC circuit when charging.
3. The charging icon (A) flashes as the battery is being
charged. Once charging is complete, the icon stays
illuminated.
4. For charging times, refer to the Technical Specifications
section for charging times specific to the model and
equipment level of your Zero Motorcycle. See
“
Technical Specifications”, on page 8.1.
Note: The charging icon is solid green when fully charged
and plugged into the charger.
Zero Owner's Manual (FX and FXS).book Page 7 Tuesday, October 23, 2018 1:54 PM