ZEROXCLUB INSTRUCTIONS MANUAL
1. Disconnect the camera and reconnect to see if the image become
normal.
2. If it still has a same problem, please contact us at
sales@uszeroxclub.com with your Amazon order ID and the picture
of the issue.
Camera is blurry/has some condensation inside
1. Check if there any loose or faulty connections triggering such
mishaps.
2. Please contact us in time at sales@uszeroxclub.com with the picture
of the issue and your Amazon Order ID.
The camera goes in and out of connectivity
1. Check proper wiring to avoid loose and poor attachments and
connections of wires, as this may affect the delivery of images.
2. Check if the voltage is stable and keep at 12V+
3. Look at the camera to find if the antenna wire is off.
4. Check if the antenna connector/base on the camera is loose.
5. Check the antenna connection for the monitor: Check if the antenna
on the monitor has detached and check if the wires are not connected
inside.
6. Check if the antenna wire/base coming loose when the antenna is
screwed on to the monitor.
7. Check if the monitor power cord can stay connected to the cigarette
lighter outlet.
8. Please contact us at sales@uszeroxclub.com with your Amazon
Order ID. It would be better if you could attach the video of the issue.
The display shows No Signal/Blue screen
1. Check if the camera unit is receiving power.
2. Re-pair the camera to the monitor, the pairing method refers to 4.2.1
3. Check proper wiring to avoid loose and poor attachments and
connections of wires, as this may affect the delivery of images.
To Next Page
Loading...
Need help?
General