ZEROXCLUB INSTRUCTIONS MANUAL
1.2 Use the updated bracket, and install it to the place you want.
1.Mark camera mounting
position. Screw on
according to the mark.
2. Tighten the screws on
both sides of the camera
3.Adjust the camera angle as
needed.
2. Connect the Power Cord
Connect the Power Cord to camera, then power it
*Before fixing the camera, you can adjust the lens of it.
2.5 Power Monitor & Camera
① Mount the antennas
to cameras and monitor
② Connect the power cord or car
charger to camera and monitor
③ Power the camera
and monitor
*Recommend to test system with temporary mounting and wiring before
final installation.
To Next Page
Loading...
Need help?
General