ZEROXCLUB INSTRUCTIONS MANUAL
The screen remains normal (default).
The image is flipped left and right.
The image is flipped upside down.
After the image is flipped left and right, it is flipped up and
down again.
4.5 SYSTEM Operation
Set the LANGUGE and P-LINE parameters.
Press
MENU→
Go into
SYSTEM →
Press
SEL→
Press
+☼/-☼
to select to
adjust the LANGUGE/P-LINE→Press SEL→Press +☼/-☼ to adjust
settings
If you need to display the parking guidelines on the camera
screen, simply switch to the camera screen, then go to system
settings to turn on P-LIN, the camera screen will then display
the parking guidelines. Parking guidelines are controlled
separately for each camera. (If P-LINE is not turned on for the
other screens, the parking guide lines will not be displayed).
5 Troubleshooting
1. Re-pair the camera to the monitor, the pairing method refers to 4.2.1
2. Check the wiring in the correct wiring connection.
3. Check to ensure that the connection to the camera is tight.
4. Verify that the red positive trigger on power cable is put to power
12v+.
5. After connecting the camera, please cover the camera's sensor (like a
light on the camera) with your finger and check if the camera's IR
lights are on. If the light is not on, the camera is not getting power,
please check the wiring or replace the power supply.
Note: If it still doesn't work, please contact us at sales@uszeroxclub.com
with your Amazon order ID
To Next Page
Loading...
Need help?
General