ZEROXCLUB INSTRUCTIONS MANUAL
sales@uszeroxclub.com with the video of the issue and your Amazon
Order ID, we will help you fix it
Pictures overexposed/wash out
1. Check whether the camera is pointed at the sky (light source)? If so,
please adjust it so that it no longer looks directly at the light source.
Note: when the screen is exposed, the brightness may not be adjusted.
Please try to avoid this situation.
2. If the picture does not improve after adjustment, there may be a
problem with the camera, please contact us at sales@uszeroxclub.com
with the pictures of the issue and Amazon order number
1. When pairing, the distance between the camera and the screen is too
far. Make sure to keep it within 3 feet.
2. Connecting the camera prematurely. Do not plug the camera into the
power until the pairing count-down had already started.
3. Loose connection. Confirm connections are tight and correct.
4.
The voltage is not enough 12V+. Change a car battery or order a 12V
DC power adapter filter rectifier to solve it.
5. Pairing is interfered with. Please disconnect all cameras and connect
the camera to be paired according to the pairing 4.2.1 pairing steps.
6. Check if the little pin on the inside of the power plug for the camera
is broken off.
7.
Check if the little pin on the inside of the plug for the antenna is
broken off.
Warm tips: If you have any questions not mentioned above, just
feel free to email us at sales@uszeroxclub.com. We're always
there for you!
6 FAQS
6.1 Q: Why does the monitor not respond ?
A: The MENU button just works when the monitor stays on the
single-screen mode. (Please press the CH- button to switch the screen to
single screen.)
To Next Page
Loading...
Need help?
General