How to adjust the Seat
NOTE: Do not use solvents to clean the seat. Use warm water with a little detergent added.
Before operating a Tractor it is important to adjust the seat to the most comfortable position & check whether
it is properly locked in its position. Figure 1 identifies the seat fitted to your Tractor.
For sliding seat
Caution: Do not put a hand between the seat and the slides when adjusting the seat position.
You can get injured unexpectedly.
1 - Seat Bel
2 - Forward / Backward adjustment lever
3 - Knob for weight adjustment
U18N005
To select seat position, move adjusting lever and slide
seat closer to or away from dash panel and controls.
3
ROPS (ROLL OVER PROTECTION STRUCTURES)
To Next Page
Loading...
