Zip 5253UK - Technical Specifications

11
Installation instructions
805845UK v1.02 July 2018 - G4 Command Centre
Technical support
Tel: 0345 6 005 005 Email: service@zipindustries.co.uk www.zipwater.co.uk
Command
Centre
Capacity boiling
(167ml cups
/hr)
Capacity
chilled/
sparkling
(200ml
glasses/hr)
Power
rating
(kW)
230V
Boost
rating
(kW)
230V
Boost
(10A)
**13A sockets
required
Unit Dimensions****
W x D x H (mm) with air
duct
***Dry
weight
(kg)
Commercial Command Centres
Filtered Boiling, Chilled and Sparkling, with and without booster
5253UK
#
5053UK
160 / 240* 175 2.30 2.20 optional 1 / 2* 450 x 470 x 335 39
2957UK
#
2857UK
100 / 140* 75 2.13 2.20 optional 1 / 2* 338 x 461 x 335 30
Filtered Boiling and Chilled, with and without booster
5261UK
#
5061UK
160 / 240* 175 2.13 2.20 optional 1 / 2* 450 x 470 x 335 28
2924UK
#
2824UK
100 / 140* 75 2.05 2.20 optional 1 / 2* 280 x 470 x 335 22
Filtered Boiling and Ambient, with and without booster
5201UK
#
5001UK
160 / 240* - 1.90 2.20 optional 1 / 2* 280 x 313 x 335 13
Filtered Boiling, with and without booster
5200UK
#
5000UK
160 / 240* - 1.90 2.20 optional 1 / 2* 280 x 313 x 335 11
Filtered Chilled and Sparkling
0053UK - 175 0.45 - - 1 336 x 476 x 335 36
Filtered Chilled
0061UK - 175 0.3 - - 1 336 x 480 x 335 24
Residential Command Centres
Filtered Boiling, Chilled and Sparkling, with and without booster
1456UK
#
1256UK
1.7 2.2 optional 1 / 2* 338 461 x 335 30
Filtered Boiling and Chilled, with and without booster
1414UK
#
1214UK
1.55 2.2 optional 1 / 2* 280 x 470 x x335 21
Filtered Boiling and Ambient, with and without booster
1501UK
#
1301UK
1.43 2.2 optional 1 / 2* 280 x 313 x 335 13
Filtered Boiling, with and without booster
1500UK
#
1300UK
1.43 2.2 optional 1 / 2* 280 x 313 x 335 11
Filtered Chilled and Sparkling
0056UK 0.35 - - 1 280 x 405 x 335 30
Filtered Chilled
0015UK 0.13 - - 1 280 x 420 x 335 20
#
Supplied with venturi for vented mixer tap
* With boost
** One for the Command Centre, and one for the booster
*** Add 3 - 8Kg when full
**** Refer to Section 7, Command Centre installation, for clearance envelope.
Component Min. / Max. water supply pressure MPa (bar)
(in a G4 Hydrotap system)
HydroTap 0.17 (1.7) - 0.5 (5.0)
Sparkling Hydrotap 0.25 (2.5) - 0.5 (5.0)
Mixer tap 0.20 (2.0) - 0.5 (5.0)
Booster 0.20 (2.0) - 0.5 (5.0)
Scale filter 0.20 (2.0) - 0.5 (5.0)
Technical specifications
Water supply pressure requirements