Installation instructions
805845UK V1.02 July 2018 - G4 Command Centre
Technical support
Tel: 0345 6 005 005 Email: service@zipindustries.co.uk www.zipwater.co.uk
Section 3 Filter / softener installation
An external filter / softener may be fitted to reduce the incidence of scale build up in the hot tank or may be
supplied at the customer’s request.
•
All information required to mount the filter head is available
separately in the following document :
•
Zip scale filter head installation and operating instructions
2017, supplied with the filter head.
3.1 Mounting the filter head
3.2 Cartridge installation and flush.
•
All information required to install and flush the cartridge is
available separately in the following documents:
•
Zip scale filter cartridge installation and operating instructions
2017, supplied with the filter cartridge.
•
Zip scale filter head installation and operating instructions 2017,
supplied with the filter head.
(From Bypass Out) Inlet
Outlet (To Bypass in)
Insert
Remove
Insert
Remove
Flush valve
To Next Page
Loading...
