How to fix a Zip Autoboil Boiler that fails to dispense water?
If your Zip Boiler fails to dispense water, it could be due to several reasons: * The water isolating valve might be turned off. * There might be a blockage in the filter, meter tube, or strainer. * The ball valve assembly could be jammed, or there might be an airlock in the transfer tube. Check the water supply valve. For further assistance, contact a Zip authorised agent.
Why is my Zip Boiler water not boiling?
If your Zip Boiler isn't boiling water, the issue could stem from a few potential causes: * Lack of power supply. * A faulty PCB (Printed Circuit Board). * A faulty element. * A faulty cut-out. Check the power supply. For further troubleshooting, it's best to contact a Zip authorised agent.
What to do if my Zip Boiler shows error code 04 05 06 07 08?
If your Zip Boiler displays error codes 04, 05, 06, 07, or 08, it indicates a boiling calibration error. First, try turning the unit off and then on again. If the issue continues, re-run the commissioning or boiling calibration. If the problem persists after these steps, contact a Zip authorised agent.
What does error code 00 01 02 03 mean on my Zip Autoboil?
If your Zip Boiler displays error code 00, 01, 02, or 03, it indicates that the boiling sensor or steam sensor is either open circuit or short circuit. Contact a Zip authorised agent for assistance.
What does error code 32 mean on a Zip Autoboil Boiler?
If your Zip Boiler displays error code 32, the unit should continue to work normally. If it does not, contact a Zip authorised agent.
General| Power Supply | Electric |
|---|---|
| Brand | Zip |
| Model | Autoboil |
| Auto Shut-off | Yes |
| Boil-dry Protection | Yes |
| Power | 2.2kW |
| Voltage | 220-240 volts |
Appliance use by children and supervised persons.
Requirement for qualified technicians for installation.
Safe dispensing of steam and boiling water.
Cautionary advice for lifting the appliance.
Requirements for upright and horizontal placement.
Advice for preventing frost damage.
Adherence to instructions and regulations.
Importance of earthing and accessible power outlets.
Potable water, valve requirements, temperature.
Indoor use, temperature limits, intended applications.
Tank size, heat-up times, power, dimensions, weight.
Wall support, space, power, water supply checks.
Minimum required clearances for installation.
Using the template for wall mounting holes.
Method for hiding inlet, vent, and electrical lines.
Procedure to remove the unit's cover.
Using screws to mount the unit.
Flushing pipes, vent pipe requirements.
Connecting water inlet and vent externally.
Connecting water inlet and vent internally.
Importance of professional installation and standards.
Connecting to a wall outlet via cable.
Connecting via a concealed cable and terminals.
Wiring for 15-25L and 40L models on single-phase.
Wiring for 40L model on 3-phase.
How to re-install the filter guide.
Securing the main cover.
Instructions for tap reinstallation.
Procedure to check electrical earthing.
Flushing the filter after installation.
Verifying plumbing connections for leaks.
Turning on power and starting calibration.
How to use the Autoboil tap.
How to use the Hydroboil Plus tap.
Explains screen symbols and button functions.
Introduction to Normal, Sleep, and Override modes.
Information displayed in Normal mode.
Information displayed in Sleep mode.
Information displayed in Sleep Override mode.
Navigating the main menu and settings.
Procedure to configure date and time.
Setting the desired boiling point.
Options for sleep mode settings.
Choosing conditions to activate sleep mode.
Defining actions for sleep mode.
Configuring the sleep mode timer.
Accessing filter-related settings.
Setting filter lifespan and tracking usage.
Steps for replacing the filter cartridge.
Accessing historical filter data.
Accessing installation-related settings.
Calibrating ambient light sensors.
Steps to calibrate boiling function.
Restarting the appliance.
Accessing information menus.
Viewing model and version details.
Displaying error codes and messages.
Detailed instructions for replacing the filter cartridge.
Symptoms, causes, and solutions for operational problems.
Explains error codes and how to fix them.
Methods for cleaning the exterior.
Recommendations for responsible disposal.
To Next Page