802265US v1.27 06.21 BCS, BCS100-75 Install Instructions Page 13 of 36
Typical Cut-out procedure for
Ventilation
1. Mark out and cut the air inlet and door outlet holes as shown
2. Ensure the air inlet vent and air outlet vent are positioned at opposite ends
of the same cabinet space.
3. Fit the inlet vent, as shown and secure with 5 screws
4. Fit the outlet vent, as shown in the hottest part (top) of the cabinet and
secure with 4 screws
B
D
B
Air inlet vent
(1/5")
Cut-out details
(12⅜")
(½")
(½")
(½")
(11/16")
To Next Page
Loading...
