Zip HydroTap BCS Series - Model BCS 100;75 Celsius All-In-One Installation Diagram

802265US v1.27 06.21 BCS, BCS100-75 Install Instructions Page 19 of 36
Installation Instructions
: Not required for standard BCS HydroTap models
H
4.6 Model BCS 100/75 Celsius All-In-One (Mains)
Note: The tube lengths are matched to the pump performance and therefore CANNOT be lengthened
RED
CLEAR
BLUE
BRAIDED
BRAIDED
USB
CHILLED
OUTLET
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT BYPASS
OUT
SPARKLING
OUTLET
CO2
IN
WHITE
External HOT and
COLD isolation
valves
(Not Supplied)
Note:Note: the the
hoses need to hoses need to
have a constant have a constant
downward downward
gradient to the gradient to the
HydroTap to HydroTap to
allow all water allow all water
to drain back to drain back
into the tanks.into the tanks.
Note:
Mains hose length is
750mm (30”)
Plug and Cord length is
1800mm (70”)
Position the Command
Center close to the
outlet faucet, within
reach of the hose and
cord lengths supplied