Zip HydroTap BCS Series - General Product Features

802265US v1.27 06.21 BCS, BCS100-75 Install Instructions Page 5 of 36
Thank you for purchasing a Zip HydroTap. Please read and follow these instructions carefully to ensure safe
and trouble free service.
What is the Zip HydroTap ?
The Zip HydroTaps are electronically controlled, filtered, Boiling, Chilled and Sparkling water, drinking
systems for kitchens and tea rooms. The HydroTap Command Centers are under bench drinking water
appliances with a dispensing faucet mounted on a sink or bench, which may be used for residential or
commercial applications. These units utilise a conventional refrigerant compressor to chill the water and
an immersion heating element to boil the water, and all utilise a CO
2
gas cylinder to carbonate the chilled
water. Depending on the model, these units will dispense boiling water, factory set to 98°C (208°F) chilled
water, factory set to 6 - 10°C (43-50°F). These Command Centers are NOT designed to be used for sanitary
fixtures.
The boiling water units are fitted with a faucet-mounted child safety lock. In addition, there are various energy
saving options accessible via the main menu. Each boiling unit is equipped with a self-calibrating program
which caters for altitude adjustment. The CO
2
bottle and water filter require periodic replacement and are
covered by a limited OEM warranty.
General Product Features
ON-OFF Switch
Din plug
(for accessories)
IEC Socket
110-120V, 60Hz
OR
230V, 50Hz
HydroTap BCS
Command Center