Page 16 of 36 802257 - HydroTap B, BA, BHA, BAHA, Installation Instructions - July 2015 - v2.00
Cut a 35mm hole in the bench / sink top.
SINK TOP
1.10
35mm
Note: make sure the tap location will allow the
nozzle to drain into the sink.
Tap assembly exploded view and kitchen layout side view.
BRAIDED
HOSE x 3
Mixer Tap Installation
Note
:
The mixer tap requires a Zip Restricta! ow
valve, as supplied, to be " tted in the cold
water supply line, from the isolation valve tee
piece, to the mixer tap. (See diagrams)
Min 300mm
1.11
O-RING
LOWER
RUBBER
WASHER
WASHER
NUT
External Mains
Blue band
Mixer IN
Red band
Mixer Out
Red Band
Blue Band
To Next Page
Loading...
