Zip HydroTap G4 B - STEP 2- Check for Adequate Ventilation; Section 2 - Ventilation; Details; All Models

802257 - HydroTap B, BA, BHA, BAHA, Installation Instructions - July 2015 - v2.00 Page 23 of 36
2.1 All Models
Proper air circulation must be provided for all models. The system will operate correctly only if the recommend-
ed air gaps are achieved during installation.
IMPORTANT: See section 4.3 for clearances.
Section 2
Ventilation
It is important to adjust both cupboard door hinges and attach rubber door buffers to the doors to create a 4
mm air-gap between the doors and the cupboard. This is the minimum ventilation requirement for low usage
installations.
For high use applications, where the cupboard space temperature is near 35°C, or higher, a vent kit must be
fitted. (Contact your local service centre for availability).