Zip HydroTap G4 B - Installation Instructions

Page 18 of 36 802257 - HydroTap B, BA, BHA, BAHA, Installation Instructions - July 2015 - v2.00
Installation Instructions
COLD isolation valve
(Not supplied)
280mm
335mm
Note: The mixer tap requires a Restricta! ow valve to be
" tted in the cold water supply line, from the isolation valve
tee piece, to the mixer tap. (See diagrams)
Restrictafl ow valve
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the under
sink unit close
to the outlet tap,
within reach of
the hose and cord
lengths supplied
Note: All
silicon tubes
must be cut to
size. They must
have a constant
fall back to the
unit.
1.13