16
Quick Start Installation Guide
807119 v1.08 05.23 G5 BCS Quick Start Guide
SECTION 8: Connect the water supply
Isolation valve
(not supplied)
Valves and fittings must be sealed with PTFE tape if compression
seals are not included.
Strainer
(supplied)
Male - Female
adaptor
(supplied)
Connect together
Connect to
Command Centre
see pages 26-29
Note Mixer tap installations also use a ‘tee piece’ as part of the water supply
plumbing connections, see the Tap installation instructions supplied with the
Mixer Tap to connect the water supply if using the mixer tap option.
Note: correct strainer orientation.
Connect to
Command Centre
see pages 26-29
To Next Page
Loading...
