To Next PageTo Next Page
Need help?Do you have a question about the Zipp MINI 2 and is the answer not in the manual?
General| Brand | Libratone |
|---|---|
| Model | Zipp MINI 2 |
| Bluetooth | Yes |
| Battery Life | Up to 12 hours |
| AUX Input | Yes |
| Built-in Microphone | Yes |
| Wi-Fi | Yes |
| Type | Portable Speaker |
| Connectivity | Bluetooth, Wi-Fi |
| Frequency Response | 20 kHz |
| Multi-room | Yes |
Long press the power button for 2 seconds. The Nightingale indicator will light up, indicating connection mode.
Run the Libratone App and follow on-screen instructions to complete the Wi-Fi setup process.
Access the Settings panel by long-pressing the Nightingale, then press the Connection icon to change the Wi-Fi.
Navigate to the speaker page in the Libratone App and tap the Microphone icon to enable the voice assistant.
Log in with your account in the Libratone App to fully activate and use the voice assistant features.
Play music from your iOS device using AirPlay via the Control Center.
In the Control Center, select the AirPlay icon and choose your Libratone speaker from the list.
Stream music from Spotify to your speaker using Spotify Connect on various devices.
Understand the meaning of different light patterns on the Nightingale indicator.
Use double or triple taps on the Nightingale to control music playback and calls.
Rotate your finger clockwise or counterclockwise on the touch interface to adjust the volume.
Lower music momentarily by placing your hand over the touch interface to activate HUSH.
Activate the voice assistant by saying the wake word or tapping the microphone icon.
Tap the power button when the speaker is on to check the battery level.
Tap the microphone icon to turn on/off the microphone or voice assistant.
Tap the connection icon to enter the speaker's connection mode for pairing.
Tap the icon to start the room correction process for optimal audio.
Tap the heart icon to toggle through or manage your 5 preset playlists.
Tap the icon to start/end Link setup or join an existing Link.
Tap the icon to check for or start a firmware update for the speaker.
The microphone and Nightingale indicators blink twice when the voice assistant is woken up.
The heart icon is lit when a preset playlist is currently playing.
In sleep mode, the bottom light is solid, and all other lights are off.
Lights rotating on the touch panel indicate a warning or pending action.
Tap the SoundSpace Link icon on speaker 1 to initiate the linking process.
When the icon flashes on another speaker, tap it to join the existing Soundspace Link.
Long press the SoundSpace Link icon on a speaker for 2 seconds to remove it from the Link.
Long press the Nightingale to access settings, then press the Connection icon to enter Bluetooth pairing mode.
On your phone, go to Bluetooth settings and select 'Libratone SPEAKER' for pairing.
Connect using a 3.5mm audio cable or plug in a USB disk for playback.
Learn how the Wi-Fi router facilitates music playback and control from mobile devices.
Connect your speaker to Wi-Fi on iOS devices without using the Libratone App.
Troubleshoot playback interruptions due to weak Wi-Fi signal or interference.
Discover supported audio inputs (Wi-Fi, Bluetooth, etc.) and how to switch between them.
Steps to change or update your 5 preset playlists in the Libratone App.
Learn how to play music directly from a USB disk and supported formats.
Understand limitations and alternatives for playing music via Wi-Fi outdoors.
Identify the product name (ZIPP MINI 2) and model number (LTH210).
Details on speaker drivers (woofer, tweeter) and passive radiators.
Key performance data including Max Power, S/N Ratio, Max SPL, and Frequency Response.
Information on supported audio inputs and battery life (Playing/Charging Time).
Physical measurements of the speaker, including diameter and height.
