Zippity Baskenridge - Step 2: Assemble Gate Frame

WWW.ZIPPITY-OUTDOOR.COM
6
ASSEMBLY INSTRUCTIONS
ZP19038
STEP 2: ASSEMBLE GATE FRAME
STEP 2.1
STEP 2.2
Orient the Gate Posts (E) so the tabs are
facing up as illustrated. Insert the gate
.
(F) into the
routed holes in the gate rail

Slide the second gate rail over the gate posts

and rail align. The pickets will click into place.
Fasten the gate rail to the gate posts using (4) ¾”
white self-drilling stainless steel screws.
Align the pre-drilled holes in the gate rail
with the pre-drilled holes in the gate posts
and fasten together with (4) ¾” White
Self-Drilling Stainless Steel Screws (J).
D
E
tabs
Note: The routed
picket holes should be
facing down.
Align
J
F
STEP 2.3 STEP 2.4
Align