Zippity Birkdale User Manual

Check Box for These Contents
In the event of missing or defective parts please call our customer service department at 1 877 234 6196 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
1. Post Caps (2)
2. Top & Bottom Rails ( 2) - 1½” x 1½“ x 92”
3. Posts (2) - 7/8“ x 1½” x 71”
4. Spindles (15) ¼” x 1½” x 46 ¼“
5. Joiner Clips (2)
6. 3/4” Self-Auguring Stainless Steel Screw (12)
Tools You Will Need
• Cordless Drill
• Level
• Hammer
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 5’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling components.
Birkdale Vinyl Fence Kit
(48 1/2”H x 92”W)
Please read through before starting assembly.
ASSEMBLY INSTRUCTIONS
1
IMPORTANT: CHECK THE INSIDE OF THE LARGER PIECES IN YOUR BOX FOR OTHER MATERIALS
PACKED INSIDE.
Ver 1.1/060317
1
3
2
4
Ground
6
Not to Scale
5
3 7/8 in
20 in
43 9/32 in
41 3/4 in
2 in
48 1/2 in
45 in
51 1/2 in
92 in
THIS FENCE IS DESIGNED
FOR SEMI-PERMANENT
APPLICATIONS

Zippity Birkdale Specifications

General

Brand	Zippity
Model	Birkdale
Category	Fencing & Gates
Language	English

Summary

Assembly Instructions

Check Box for These Contents

Lists components included in the fence kit for verification before assembly.

Tools You Will Need

Lists essential tools required for the assembly process.

General Information

Provides important advice and precautions for a successful and safe fence assembly.

STEP ONE

Position Bottom Rail and Posts

Attaching the bottom rail to the posts, ensuring correct orientation and alignment of pre-drilled holes.

STEP TWO

Insert Spindles and Top Rail

Inserting spindles into the bottom rail and attaching the top rail to complete the fence panel structure.

Secure Rails to Posts

Fastening the top and bottom rails to the fence posts using screws for structural integrity.

STEP THREE

Install Fence into Ground

Driving the fence posts into the ground using loosening techniques and a hammer for stability.

Options in Hard Ground

Alternative method for installing fence posts in hard or challenging soil conditions using an auger bit.

Install Fence into Ground - Continued

Backfilling and compacting soil around posts, and attaching post caps to finalize installation.

STEP FOUR

Fasten Joiner Clips

Securing the fence panels together using joiner clips attached to the top and bottom rails.