Zippity BURBANK - Step 3: Insert Fence Picket; Step 3.1: Install Pickets into Rails

WWW.ZIPPITY-OUTDOOR.COM
6
ASSEMBLY INSTRUCTIONS
ZP19057
1. Rotate the
fence panel so the
ground stakes face

Picket (D) into the


2. Insert (9)


holes in the rails.
D
1
2
STEP 3: INSERT FENCE PICKETS
STEP 3.1
STEP 2.3
1. , 



align.
2. 
(I) 
exposed anchor should be

the post.
3. Drill holes in the post



4.


I
E
Preview
16in
Preview
3
2
1
4
