The Zippity Washington Vinyl Picket Fence Kit 2-Pack (30"H x 42"W), model ZP19048, is a decorative and functional outdoor fencing solution designed for easy assembly and installation. This kit provides two fence panels, offering a quick and straightforward way to enhance outdoor spaces.
Function Description:
The Zippity Washington Vinyl Picket Fence serves as a boundary marker, decorative accent, or low-level barrier for gardens, pathways, or other outdoor areas. Its vinyl construction ensures durability and low maintenance, making it suitable for various weather conditions. The design features a classic picket fence aesthetic with a scalloped top edge, adding a touch of charm to any landscape. The fence panels are designed to be installed directly into the ground, with options for both soft and hard soil conditions. The kit also allows for connecting multiple panels at various angles (45° or 90°) to create continuous fencing runs or corners.
Important Technical Specifications:
- Dimensions (per panel):
- Overall Width: 42 inches
- Overall Height: 29 3/4 inches
- Height from ground to top rail: 23 1/2 inches
- Picket Spacing: 2 7/8 inches (approximate)
- Post Height (above ground): 16 inches
- Post Height (below ground): 12 inches
- Bottom Rail Height (above ground): 2 inches
- Overall Length of Rails: 37 5/8 inches
- Materials: Vinyl for posts, rails, pickets, post caps, and rail end caps. Stainless steel self-drilling screws for assembly and fastening.
- Kit Contents (for two panels):
- Post Cap (A): 4 units
- Rail End Cap (B): 8 units (4 loose, 4 installed)
- Top Rail (C): 2 units (1½" x 1½" x 41¾")
- Bottom Rail (D): 2 units (1½" x 1½" x 41¾")
- Picket (E): 16 units (4 each of #1, #2, #3, #4, with varying lengths for the scallop pattern: #1 - ½" x 1¼" x 25½", #2 - ½" x 1¼" x 23½", #3 - ½" x 1¼" x 21½", #4 - ½" x 1¼" x 21")
- Post (F): 4 units (7/8" x 1½" x 41½")
- Joiner Clip (G): 4 units
- ¾" Self-Drilling Stainless Steel Screw (H): 16 units (Bag A)
- 1" Self-Drilling Stainless Steel Screw (I): 8 units (Bag B)
- Assembly Time: Approximately 45 minutes for two fence panels.
Usage Features:
- Easy Assembly: The product is designed for straightforward assembly, with components that pressure-fit and screw together. A video tutorial is available via QR code for visual guidance.
- Scalloped Picket Design: The pickets are numbered to facilitate the creation of an aesthetically pleasing scalloped top edge.
- Ground Installation: The fence posts are designed to be pushed directly into the ground.
- Adaptability to Ground Conditions:
- Soft Ground: The unit can be pushed into the ground with manual force.
- Hard Ground (Optional Methods):
- Loosen the top 6-7 inches of soil with a claw hammer, then add water before pushing the unit in.
- Use a block of wood to protect the post top and gently hammer the post into the ground.
- For very hard ground or multiple panels, a 1½" diameter auger bit (e.g., for planting tulips) can be used to drill 12-16 inch deep holes, which are then filled with water before inserting the posts.
- Panel Connection: Joiner clips and 1" self-drilling stainless steel screws (I) are provided to fasten fence panels together, allowing for 45° or 90° installations to create continuous fencing or corners.
- Post Caps: Post caps (A) are pushed over the top of the posts to complete the assembly and provide a finished look.
- No Excessive Force Required: The instructions emphasize that excessive force should not be needed during assembly, indicating a well-engineered fit for components.
- Non-Abrasive Assembly Surface: Recommended to assemble on a non-abrasive surface (like the shipping box) to prevent scratching.
- Recommended Assembly Area: Approximately 5'x 8' for unobstructed assembly.
Maintenance Features:
- Vinyl Construction: The use of vinyl material inherently offers low maintenance, as it is resistant to rot, rust, and insect damage, and typically does not require painting or staining.
- Replacement Parts Availability: In case of missing, damaged, or defective parts, customers can order replacements through the manufacturer's website, email, or phone. This ensures the longevity and repairability of the product.
- Customer Support: Comprehensive customer service is available via website, email, and phone (704-892-5222 / 877-234-6196) for assistance with missing/damaged parts, assembly, or installation issues. This support system helps users maintain their fence effectively.
- Batch Lot Information: Providing the batch lot number (stamped inside the box) is helpful for quick and accurate assistance with replacement parts, aiding in efficient maintenance and repair.
To Next Page
Need help?
General
