Summary
* Ensure to enrol an admin-
istrator on the unit before
enrolling users
4. User
4.1 Enrolling User
The terminals can enrol, passwords and card information. This chapter covers all possible
user enrollments in the terminals. Caution: Enrollment of supervisor or administrator is im-
portant to ensure the terminals data safety. Prior to enrolling a new user, a supervisor has
to be enrolled fi rst by using any of the methods mentioned below. Select Enroll Admin >
Choose the Privilege Level either Supervisor or Administrator to proceed.
4.1.1 Card Enrolment
The default card for the terminal is the RFID card. MiFare and HID card systems are avail-
able upon request.
Enrolling Card:
• Press Menu > User Manage > Enroll User > Reg RFID > New Enroll? > OK > Key in User
ID (PIN) > Wave the card at the scanning area until the screen displays the Card ID
> (OK) Save
4.1.2 Password Enrolment
The terminals offer password verifi cation and the maximum length of password is 5 digit.
Enrolling password: Press Menu > User Manage > Enroll User > Enroll Pwd > New Enroll? >
OK > Key in User ID (PIN) > OK > Input your password > LCD showing the ID with minus -P
to indicate that the user ID is using password > OK (Save)
Changing password:
• Press Menu > User Manage > Enroll User > Enroll Pwd > ESC > Input User ID > OK >
Change your password > LCD showing the ID with minus -P to indicate that the user
ID is using password > OK (Save)
4.1.3 Card and Password Enrolment
The terminals offer a combination of card and password enrollment for better security.
Enrolling Card and password:
• Press Menu > User Manage > Enroll User > Reg Card & Pwd > New Enroll? > OK > Key
in User ID (PIN) > OK > fl ash the card > Input your password and confi rm the pass-
word one more time > LCD is showing the ID with minus -OP to indicate that the user
ID is using a combination of card and password > OK (Save) Linking with USB fl ash
disk for remote data transfer.
* Password / pin options
available for added secu-
rity
9
To Next Page
Loading...