CMP-200 User Manual
Page | 21 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
8. Barrier gate spring and the corresponding boom length type:
9. Study/Delete Remote Control Code
Study code:
• In the Stop state, press the “Study” button on the main controller until
the REMOTE indicator is ON and then release it.
• Then press any button on the remote control, the REMOTE indicator turns
OFF. In this process, the code of studying will be completed.
Delete code:
• To process the Code deletion, in the STOP state, press the Study button
on the main controller until the REMOTE indicator is ON, continue to press
the ‘Study’ button, and hold on until the REMOTE indicator is OFF.
• Note: All the codes will be deleted in this process).
Note: One barrier can only study up to 20 remote controls. The matching
remote control will be studied already, and there is no need to read again.
To Next Page
Loading...
