ZKTeco F18I Quick Start Guide

selection. The F18 will prompt you “OKDel”? Press the OK again to confirm deletion.
Set Communications Options:
The F18 can communicate via the Network (Ethernet), RS/232 or RS485.
Network (Ethernet)
Press the Menu key to open the Main menu;
From the Main Menu, highlight and select Comm. to configure Communication Settings.
Then press the OK Key to accept
From within the Comm Menu, scroll with the ◄/► keys until Network is highlighted. Press
the OK key to accept.
Notice the following “Network” settings are available

ZKTeco F18I Specifications

General

Brand	ZKTeco
Model	F18I
Category	IP Access Controllers
Language	English