ZKTeco MB10-VL User Manual

MB10-VL User Manual
Page | 13 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Verification Mode
1.4.1 Fingerprint Verification
 1: N fingerprint verification mode
It compares the current fingerprint with all the fingerprint data that is available in the device. The device
enters the fingerprint authentication mode when a user presses his/her finger onto the fingerprint scanner.
Please follow the recommended way to place your finger onto the sensor. For details, please refer to 1.1
Finger Positioning.
The following screen displays on successful and failed verification respectively.
On successful verification On failed verification
 1:1 fingerprint verification mode
It compares the current fingerprint with the linked fingerprints to the entered User ID via the virtual
keyboard. Users can try verifying their identity with 1:1 verification mode if they are unable to get access
with the 1:N authentication method.

ZKTeco MB10-VL Specifications

General

Display	2.8-inch TFT Screen
Logs Capacity	100, 000
Communication	TCP/IP, USB Host
Operating Temperature	0°C to 45°C
Operating Humidity	20% to 80%
Matching Mode	1:N
Security Level	High
Standard Functions	DST
Optional Functions	ID Card
Verification Speed	≤1 second
Power Supply	12V DC