ZKTeco PL10 User Manual

7
Operating Steps
Indication of the lock
Touch the infrared sensor hole
to power on lock
Press button "+"
Place one finger 3 times on
the fingerprint sensor
Registration succeed
One Beep for the first two
fingerprints; A long beep
and LED blinks green 1
second for the third
fingerprint.
One beep
Fingerprint sensor is power
on, LED blinks green
Register NEW users
Note: 1.The first user will be the first Admin automatically at default.
2. Admin group supports 10 users; you can still register 9 new Admins in next step.
3. The operating steps of Register new users: Press button 1/2/3 to select user group, then
place one new finger 3 times on the fingerprint sensor to continue register new user.
Register First Admin
Operation Guide

ZKTeco PL10 Specifications

General

Brand	ZKTeco
Model	PL10
Category	Locks
Language	English