ZKTeco PL10 User Manual

8
Operating Steps
Indication of the lock
Touch the infrared sensor hole
to power on lock
Press button "+"
Place one finger 3 times on the
fingerprint sensor
Registration Succeed
Fingerprint sensor is power
on, LED blinks green
One beep
Place any admin finger 1 time to
verify Admin
Press button "1" to select Admin
group
One beep
One beep
One Beep for the first two
fingerprints; A long beep and
LED blinks green 1 second
for the third fingerprint.
Register NEW users
Note: 1. Admin group supports 10 users; you can still register 9 new Admin in this step.
2. The operating steps of Register new users: Press button 1/2/3 to select user group, then
place one new finger 3 times on the fingerprint sensor to continue register new user.
Register Other Admin
Operation Guide

ZKTeco PL10 Specifications

General

Brand	ZKTeco
Model	PL10
Category	Locks
Language	English