Why does my Zline RG Ranges oven have soot in it?
- MMichele BowersSep 7, 2025
If you see soot in your Zline range, and the range uses liquid propane gas, ensure that both the orifices and the regulator have been converted.
Why does my Zline RG Ranges oven have soot in it?
If you see soot in your Zline range, and the range uses liquid propane gas, ensure that both the orifices and the regulator have been converted.
Why does my Zline RG Ranges burner not ignite?
If a burner on your Zline range doesn't ignite, it could be because the gas supply valve is in the “OFF” position or the gas supply is interrupted.
Why is the flame too high on the low/simmer setting of my Zline Ranges range top burner?
If the range top burner’s low/simmer flame setting is too high on your Zline range, all burners should have been adjusted during installation with the flame adjustment tool that comes with each range. See Installation Manual for how to adjust the burner flame’s height.
What to do if igniter is barely sparking, no flame ignition on Zline RG?
If the igniter is barely sparking but there's no flame ignition on your Zline range, call 1-614-777-5004 for help.
Why is the flame large, distorted, or yellow on my Zline RG burner?
If the burner flame on your Zline range ignites but appears large, distorted, or yellow, ensure that there are no candles, cleaning products, air purifiers, etc. in the room, as the air quality may be affecting the flame color.
Warning against using air curtains that blow downwards onto the gas range.
Key safety guidelines for the home and occupants.
Procedures to follow if a gas leak is detected.
Details on the one-year parts warranty and service procedures.
Information on obtaining authorized replacement parts for the appliance.
Specifications and visual representation of the appliance's dimensions.
Warning against using aerosol sprays near a hot appliance.
Requirements and recommendations for proper room ventilation for the appliance.
Information on the appliance's compatibility with natural gas and propane.
Details on the required gas pressure for the appliance's operation.
Instructions for fitting decorative square covers onto the appliance legs.
Critical warning about securing the range to prevent tipping.
Requirements for gas connections, including shut-off valves and piping.
Guidelines for installing the appliance near kitchen cabinets and vertical surfaces.
Specifications for the appliance's electrical power consumption.
Power ratings for the oven's bake and broil heating elements.
Instructions and importance of proper electrical grounding for safety.
Crucial instruction to disconnect power before appliance installation.
Warning against using open flames during leak testing.
Requirements for installing a manual gas shut-off valve.
Guidelines for using flexible connectors in gas installations.
Instructions for installing a pressure test point stopper valve for leak prevention.
Information on the pressure regulator and its function for safe operation.
Safety reminder to disconnect power and gas before conversion.
Steps for converting the pressure regulator for different gas types.
Procedure for replacing surface burner nozzles for gas conversion.
Steps for adjusting burner flames after gas conversion.
Detailed steps to convert the appliance's pressure regulator for gas type.
Detailed steps to replace surface burner nozzles for gas conversion.
Initial step for oven gas conversion: removing trays and racks.
Step for oven gas conversion: removing the upper burner screw.
Step for oven gas conversion: removing the burner carefully.
Step for oven gas conversion: removing the nozzle using a socket wrench.
Step for oven gas conversion: replacing the nozzle.
Step for oven gas conversion: placing the burner vent.
Step for oven gas conversion: securing the burner.
Step for oven gas conversion: repeating for the bottom burner.
Procedure for adjusting the burner flame to the minimum setting.
Final steps for cleaning and preparing the appliance after installation.
Critical warning about securing the range to prevent tipping.
How to operate surface burners using electric ignition.
Instructions for lighting surface burners manually, including during power outages.
Guidelines for correct burner usage, including flame appearance and pan placement.
How to use oven function selectors and timer dials.
Best practices for using cookware with the appliance.
Precautions and tips for cooking inside the oven.
Instructions for correctly placing and adjusting oven racks.
Further guidance on oven rack placement and safety precautions.
Reinforces the importance of securing the appliance with chains to prevent tipping.
Details on the types of oven racks and shelves provided and how to use them.
Instruction for initial oven operation to eliminate moisture and odors.
Step-by-step instructions for replacing the oven light bulb.
Safety warning to disconnect power before servicing the oven light.
General instructions and warnings for cleaning the appliance.
Instructions for using the self-cleaning function of the oven.
Important caution regarding the oven door not locking during self-cleaning.